The electronic pressure switches from Trafag are based on the well-proven and highly reliable sensor technology used in pressure transmitters. Electronic pressure switches have excellent life-time due to the lack of mechanical wear and the robust design is insensitive to vibrations, pressure peaks and temperature changes.
The switches can be used to monitor both liquids and gases in most applications for example mobile machinery, hydraulics, railway, marine and water treatment.
Electronic pressure switches are highly flexible, and parameters can be adjusted by the customer to application specific needs. The switch point can be set within 1…99% of full scale, hysteresis, switch delays and more can also be adjusted.
Application: | Hydraulics, general use |
Measuring range: | 0…2.5 to 0…600 bar |
Pressure connection: | G1/4” male, et. al. |
Sensor type: | Thin film on steel |
Output signal: | Analog and 1 or 2 PNP |
Application: | Higher accuracy |
Measuring range: | 0…2.5 to 0…600 bar | Pressure connection: | G1/4” male, et. al. |
Sensor type: | Thin film on steel |
Output signal: | Analog and 1 or 2 PNP |
Application: | Shipbuildning |
Measuring range: | 0…0.2 to 0…700 bar | Pressure connection: | G1/4” male, et. al. |
Sensor type: | Thin film on steel |
Output signal: | Analog and 1 or 2 PNP |
Application: | Railway |
Measuring range: | 0…6 to 0…700 bar | Pressure connection: | G1/4” male, et. al. |
Sensor type: | Thin film on steel |
Output signal: | Analog and 1 or 2 PNP |
Application: | IO-Link & Electronic pressure switch |
Measuring range: | -0.2…0.2 to 0…700 bar |
Pressure connection: | G1/4” male, et. al. |
Sensor type: | Thin film on steel |
Output signal: | IO-Link or 2 PNP/NPN |
Application: | Shipbuilding, railway, general use |
Measuring range: | 0…2.5 to 0…600 bar | Pressure connection: | G1/4” male, et. al. |
Sensor type: | Thin film on steel |
Output signal: | Transistor (open source) |
Application: | Hydraulics, general use |
Measuring range: | 0…2.5 to 0…600 bar |
Pressure connection: | G1/4” male, et. al. |
Sensor type: | Thin film on steel |
Output signal: | 1 PNP, 2 PNP, 4..20 mA, 0…5 VDC, 1…6 VDC, 0..10 VDC |
Application: | Water threatment, aggresiv media |
Measuring range: | 0…0.2 to 0…100 bar |
Process connection: | G1/4” male, et. al |
Sensor type: | Thick film on ceramic |
Output signal: | 4..20 mA, 0..10 VDC, 0..5 V, 1..6 VDC, PNP |
Application: | IO-Link or electronic pressure switch |
Measuring range: | -0.5 … 0.5 to 0 … 100 bar |
Pressure connection: | G1/2″ male, flush membrane |
Sensor type: | Thin film on steel |
Output signal: | IO-Link, PNP/NPN/Push-Pull configurable |